Installation steps of ceiling lamp selection metho

2022-07-22
  • Detail

Ceiling lamps are widely used. At present, they have become common lamps in offices, families, entertainment and other places. Due to the fashionable appearance design and various styles of ceiling lamps, more and more people begin to favor ceiling lamps. The following small series will introduce the installation steps of ceiling lamps and the selection methods of ceiling lamps in detail

ceiling lamps are widely used. At present, they have become common lamps in offices, families, entertainment and other places. Due to the fashionable appearance design and various styles of ceiling lamps, more and more people begin to favor ceiling lamps. The following small series will introduce the installation steps of ceiling lamps and the selection methods of ceiling lamps in detail

installation steps of ceiling lamp

1. Select the position

first, determine the installation position of ceiling lamp. It is best to choose the wall or ceiling with stone brick structure that can bear the weight of ceiling lamp for installation. Try not to choose wooden wall to avoid the risk of falling over time

2. Remove the ceiling lamp mask

remove the ceiling lamp mask, but pay attention to avoid damaging the ceiling lamp. After the mask is removed, remove the lamp tube casually to prevent the lamp tube from being broken during installation

3. Install the base

when installing the base, first mark the position with an electric drill, and then install expansion bolts for fixing the base in the hole. Pay attention to that the drilling diameter and embedding depth should be consistent with the bolt specification

4. Connect the wires

after the base is fixed, connect the wires, but pay attention to the two wire ends of the ceiling lamp power line. The electrical contact should be good, and they should be wrapped with black tape respectively, and keep a certain distance. Try not to put the two wires under the same metal sheet to avoid short circuit

5. Install the mask and pendant

after the wire is connected, it can be powered on to see whether it can be used normally. If there is no problem, you can install the mask. In addition, some pendants need to be installed, because each ceiling lamp pendants are different, and the specific installation method can be installed according to the instructions

purchase method of ceiling lamp

1. Determine the purchase quantity first

when purchasing ceiling lamps, you should first determine the quantity, so that there will be no problem of buying less or more. General bedroom can choose the same series of products; The living room and dining room can choose the products of mother and son series; The kitchen and bathroom can choose products with the same ceiling size

2. Choose mask materials

currently, the mask materials on the market include acrylic mask, plastic mask and glass mask. For the quality of the mask, you can press the mask by hand to see how soft it is, and then look at the color. The ruddy color is better, and it is best to see whether it is convenient to disassemble

3. Choose light source

the light sources of ceiling lamps are divided into ordinary incandescent lamps, fluorescent lamps and halogen tungsten lamps. The use of ceiling lamps for different light sources is different, while the ceiling lamps of LED light sources are more affordable, energy-saving, long service life and high cost performance

editor's summary: This is the introduction to the installation steps and selection methods of ceiling lamps. I hope it will be helpful to you. If you want to know more about relevant knowledge, you can pay attention to information

北京眼科医院

太原外阴白斑医院

成都性病医院

Copyright © 2011 JIN SHI